User's Manual

4. Press Tab and type in the text that will appear in the display label for the key, for example,
Under in the first field and Line in the second for Under Line. Press Tab to move down to the
next line.
5. Press F7 to enable Display Functions mode
6. Press Ctrl + [ together or the Esc key, followed by the characters &d and the attribute character,
which for underline is D.
The key definition should look like this if the F1 key was defined to enable the underline attribute:
For any other attribute or combination of attributes, substitute the last character in the second line
(D in the example above) with the relevant character from the following table.
7. When you have finished, press F9 to exit from the User Key Definition menu, then F10 to enable
the User Keys and display the defined attribute labels.
Setup Options
The HP 700-92/96 emulation is configured using setup options in the HP70092 Settings dialog
which can be displayed using one of the following three methods:
Using the Session Wizard:
◦
In Step 1 set Emulation to HP 700-92/96 then click the Configure button.
Using the TeemTalk Window:
◦
On the Session menu, select Emulation > HP 700-92/96 then select Configure
Emulation....
◦
On the configuration bar, select HP 700-92/96 in the Emulation list box then click
Configure Emulation.
The setup options are grouped on three tabs labelled General, Configuration and Preferences.
112 Chapter 13 HP 700-92/96 Emulation