User's Manual

dialog determine which screen is displayed above the other. When viewing the display, pointers at

each end of the dividing line between the two screens indicate which is the host screen.

Key Functions

The keys used by default for Notice Board functions are shown below together with the equivalent

virtual key names that can be used to assign the functions to any key on the keyboard.

101/102 Key Keyboard Virtual Key Names

NB Setup: Alt + F2 IB_NB_SETUP

Zoom: Alt + Page Up IB_NB_ZOOM

Jump: Ctrl + Page Up IB_NB_JUMP

NB Copy: Ctrl + Shift + Page Up IB_NB_COPY

Copy: Shift + Page Down IB_COPY

Copying Screen Data to the Display

1. Position the text cursor at the start of the area to be copied.

2. Press the Copy key to start the Copy function. Note that the status line will display the key

functions available.

3. Use the cursor keys to move the text cursor to the diagonally opposite corner of the display area to

be copied. The currently selected area will be highlighted in green. Note that you can toggle the

position of the text cursor between the two diagonally-opposite corners of the selected area by

pressing the Return key.

4. Press F13 to copy the selected area. The copied area (i.e. the target) will be highlighted in red.

5. Use the cursor keys to move the red target area to the required position on the display. You can

also use the Jump key to move the target area to the host screen or Notice Board.

6. Press Enter on the numeric keypad to save the copied area at the current position on the display.

Copying Screen Data to a Function Key

The following procedure describes how to copy screen data to a function key. Note that the 3270

Display Settings dialog has several options that determine whether this facility is enabled and

whether all screen data in the selected area is copied, or only data in user entry fields. See

Notice

Board Settings on page 160 for details.