User's Manual

Notice Board Settings
●
Notice Board Enabled
Factory default: Checked
When this option is checked, pressing the Zoom key will toggle the display between full screen
(i.e. the screen currently containing the cursor) and split screen (host screen and Notice Board)
mode. The following Zoom Settings options determine which is displayed above the other.
Note that the host screen contains the same number of rows and columns whether displayed full
screen or in split screen.
●
Zoom Settings
Factory default: Notice Board Above Host
This determines whether the Notice Board is displayed above or below the host screen. When
viewing the display, pointers at each end of the dividing line between the two screens indicate
which is the host screen.
●
Copy to F-Key Enabled
Factory default: Unchecked
This enables the facility for copying screen data to a function key. Refer to the section
Copying
Screen Data to a Function Key on page 150 for details.
●
F-Key Settings
Factory default: Copy Only User Fields to F-Key
Selecting Copy Only User Fields to F-Key will enable only data contained in user entry fields
in the selected area to be copied to a function key.
Selecting Copy All Data to F-Key will enable all screen data in the selected area (protected
and unprotected) to be copied.
160 Chapter 15 IBM 3270 Display Emulation