User's Manual

9003 You pressed an invalid Fn key while performing the Record or Play function.
9007 You pressed an invalid sequence key (e.g. Play) while performing the Record function.
Remedy: Press the Reset key.
9010 While performing the Play function, you pressed an Fn key that does not have a keystroke
assigned to it.
Remedy: Press the Reset key.
9015 In communication mode, you pressed either the Quit or Pause key.
Remedy: Press the Reset key.
9019 In Record or Play mode. While the Record/play pause indicator was displayed on the status line
you pressed an invalid key (e.g. Play key in Record mode, or Record key in Play mode). Remedy:
Remedy: Press the Reset key.
Setup Options
The IBM 5250 Display emulation is configured using setup options in the 5250 Display Settings
dialog which can be displayed using one of the following three methods:
Using the Session Wizard:
◦
In Step 1 set Emulation to IBM 5250 Display then click the Configure button.
Using the TeemTalk Window:
◦
On the Session menu, select Emulation > IBM 5250 Display then select Configure
Emulation....
◦
On the configuration bar, select IBM 5250 Display in the Emulation list box then click
Configure Emulation.
The setup options are grouped on four tabs labelled Model, National, Display and Environment
Variables.
182 Chapter 17 IBM 5250 Display Emulation