User's Manual

Table 19-1 TA6530 Keyboard Mapping (continued)
Key Key Modifier Result Key Key Modifier Result
13
none
Shift +
F12
F12 (Shifted)
27 CURSOR RIGHT
14
none
Shift +
PRINT SCREEN
PRINT SCREEN
(Shifted)
28
none
Alt +
Shift + Alt +
Ctrl + Alt +
-
TAB SET
TAB CLEAR
TAB CLEAR ALL
29
none
Alt +
+
,
NOTE: All unmarked keys function as indicated by the legends on the keycaps.
The Status Line
The last (25th) line on the TA6530 emulation screen is used to display messages and status
information. You can enable or disable display of a border that separates this line from the lines above
it. This is achieved using the Status border option in the TA6530 Settings dialog.
The status line is divided into two fields. The first and leftmost field is used to display messages of up to
64 characters in length. The second field displays the current operating status and will usually display
at least one of the following status indicators:
●
ANSI
The emulation is operating in ANSI mode.
●
BLOCK
The emulation is operating in Block mode.
●
CNTRL
Display controls mode activated. In this mode, received control codes will be displayed but not
actioned.
●
CONV
The emulation is operating in Conversational mode.
●
HOLD
Hold screen is activated. The emulation stops processing incoming data when the Ctrl + S keys
are presse in ANSI mode. To release the hold state and continue normal processing, press Ctrl +
Q.
●
INS
Insert mode is activated. In Block mode, keyboard entered characters are inserted at the cursor
position without overwriting already existing characters.
The Status Line
209