User's Manual

This option applies to the WY-50+, WY-60 and all the TVI emulations. It determines whether or not
more than one page of display memory can be accessed. When checked, all pages will be
accessible. See also the Auto page option.
Note that the TVI emulations support two pages of 24 lines each when this and the Auto page
options are selected, regardless of the Screen lines and Page size settings.
●
Screen lines
Factory default: 24
This option applies to the WY-50+ and WY-60 emulations and specifies the number of data lines
displayed on the screen below the status line. Note that the other emulations only support 24 lines
and a label line.
Screen lines Effect on display
24 24 data lines and a label line at the bottom
25 25 data lines but no label line
42 42 data lines and a label line at the bottom
43 43 data lines but no label line
●
Screen columns
Factory default: 80
This option enables you to specify a display width of 80 or 132 columns.
●
Page size
Factory default: 1 x Lines
This option applies to the WY-50+ and WY-60 emulations and specifies the size of a page in
display memory in multiples of the Lines setting. Note that the other emulations only support 1 x
Lines.
The 1 + Rest setting will divide the display memory into two pages, the first containing the
number of lines specified by the Lines option, the second containing all the remaining lines.
NOTE: Changing the page format will cause the entire display memory to be cleared, the cursor
will move to the home position and the scroll margin will be reset.
●
Attribute type
Factory default: Page
The setting of this option determines whether display attributes are active to the end of the line or
the end of the page. The Character setting only applies to the WY-60 emulation and causes
attributes to only apply to characters written to the screen. The WY-50, ADDS A2 and HZ 1500
emulations only support the Page setting.
●
Status line
Factory default: Standard
This option applies to all emulations and enables you to specify the type of status line displayed at
the top of the screen, or remove it from the display.
Setup Options
225