User's Manual

Making a Host Connection
A host connection using the SSH2 protocol is made using the SSH Settings dialog which can be
displayed using one of the following three methods:
Using the Session Wizard:
◦
In Step 1 set Transport to SSH2 then click the Configure button.
Using the TeemTalk Window
◦
On the Session menu, select Transport > SSH2 then select Configure Transport....
◦
On the configuration bar, select SSH2 in the Transport list box then click Configure
Transport.
The basic procedure for making an SSH2 connection is as follows:
1. Specify the IP Address of the host to which you wish to connect.
2. Specify the host's SSH Port number (default is 22).
3. Select an Authentication profile (refer to the following sections for information on creating
profiles).
4. Click the Connect button.
14 Chapter 3 Host Connection