User's Manual

The procedure for defining a soft button is as follows:
1. In the top-right panel, select the button number (B1 - B12) on the required level (Lvl1 - Lvl4).
Note that selecting one of the Lvl# button levels will enable you to specify a title for that group of
buttons. The title will be displayed on the button immediately below the Level # button, but you
cannot program this button.
2. In the Title box enter the text to be displayed on the button (up to twenty characters).
3. In the Macro box enter the function definition for the button.
The definition can contain key functions and control characters to be actioned as well as normal
text. Refer to the appendix
Programming Keys and Buttons on page 279 for details.
Double-clicking on an Emulation Key or Virtual Key will apply that key function to the button
definition.
4. Test the function definition by clicking the Play Macro button.
5. If you want the function to be performed locally only, check the Local box.
6. Specify how many soft button levels you want to be displayed at any one time using the Visible
Levels selection list. You can display up to four levels at a time with each level containing twelve
programmable soft buttons. Selecting 0 will remove the soft buttons from the display.
7. If you want the soft buttons displayed in a separate window, uncheck the Attached to the
window option.
8. When you have finished defining soft button functions, click OK.
9. To save the soft button settings, select File > Save Session.
Defining Soft Button Functions
51