User's Manual

displayed by selecting Key Macros... on the Tools menu. Refer to the section Defining Key Functions
on page 34 for details.
Display
When running the AT&T 4410 emulation, the display size is 80 (or 132) columns by 25 lines, with a
scroll region of 24 lines.
A row of function buttons is displayed along the bottom of the window. These correspond to the
function keys F1 through F8 on the keyboard.
You can action a programmed function either by pressing the function key, or clicking the equivalent
button displayed on the screen. The middle button has no function when clicked.
Programming the Function Keys & Buttons
To program the function keys and buttons, hold down a Shift key and press any F1 - F8 key. The
Program Function Keys menu will be displayed.
Each line relates to one particular function key and its button. The two fields following the f-key number
allow you to enter a two line label of up to sixteen characters for the equivalent button on the display.
These are followed by the definition line which contains an escape sequence by default. Each definition
can contain up to 50 ASCII characters.
To program an f-key, press the F1 key to move the cursor to the relevant line and use the cursor keys to
move from one section of the line to another. You must press the F1 key to end each definition line
entry so that extra space characters are not sent to the host. Note that using the cursor keys to move to
the next line will cause the remainder of the definition line to be sent as spaces.
When you have finished defining the f-keys, press F7 to save the definitions and exit from the menu. If
you want to exit without saving the settings, press F8.
AT&T 4410 Emulation
83