User's Manual

11-15
IBM 3270 Emulation
9019 In Record or Play mode. While the Record/play pause indicator was
displayed on the status line you pressed an invalid key (e.g. Play key in
Record mode, or Record key in Play mode).
Remedy: Press the Reset key.
Notice Board Facility
Introduction
The Notice Board is an area of the display in which copied data can be stored and
manipulated.
When the Notice Board is enabled (see Notice Board Setup dialog box), pressing the
Zoom key will toggle the display between full screen (i.e. the screen currently
containing the cursor) and split screen (host screen and Notice Board) mode. The
Zoom Settings options in the Notice Board Setup dialog box determine which screen
is displayed above the other. When viewing the display, pointers at each end of the
dividing line between the two screens indicate which is the host screen.
Key Functions
The keys used by default for Notice Board functions are shown below together with
the equivalent virtual key names which can be used to assign the functions to any key
on the keyboard.
101/102 Key Keyboard Virtual Key Names
NB Setup: Alt + F2 IB_NB_SETUP
Zoom: Alt + Page Up IB_NB_ZOOM
Jump: Ctrl + Page Up IB_NB_JUMP
NB Copy: Ctrl + Shift + Page Up IB_NB_COPY
Copy: Shift + Page Down IB_COPY
Copying Screen Data To The Display
1. Position the text cursor at the start of the area to be copied.
2. Press the Copy key to start the Copy function. Note that the status line will display
the key functions available.
3. Use the cursor keys to move the text cursor to the diagonally-opposite corner of
the display area to be copied. The currently selected area will be highlighted in
green. Note that you can toggle the position of the text cursor between the two
diagonally-opposite corners of the selected area by pressing the Return key.