User's Manual

17-3
TA6530 Emulation
The Status Line
The last (25th) line in the window is used to display messages and status information.
You can enable or disable display of a border which separates this line from the rest
of the lines above it by setting the Status Border option in the TA6530 Settings
dialog box accordingly.
The status line is divided into two fields. The first and leftmost field is used to display
messages of up to 64 characters in length. The second field displays the current
operating status and will usually display at least one of the following status
indicators:
ANSI The emulation is operating in ANSI mode.
BLOCK The emulation is operating in Block mode.
CNTRL Display controls mode activated. In this mode, received control codes
will be displayed but not actioned.
CONV The emulation is operating in Conversational mode.
HOLD Hold screen is activated. The emulation stops processing incoming data
when the Ctrl + S keys are pressed in ANSI mode. To release the hold
state and continue normal processing, press Ctrl + Q.
INS Insert mode is activated. In Block mode, keyboard entered characters are
inserted at the cursor position without overwriting already existing
characters.
LOCKED The keyboard has been temporarily locked by the application.
NUM Num lock is activated. Num lock is toggled on and off by pressing the
keys Alt + Num Lock.
PROT Block Protect mode enabled. Refer to the Block Mode section for details.
When the emulation detects an error, the status line will be temporarily replaced by
an error line which will display one of the following messages:
INVALID LANGUAGE SET REQUESTED
You tried to use an invalid national character set.
INVALID DATA
You tried to enter an invalid character in the current field when in Block protect
mode.