User's Manual

ManualsBrandsHP ManualsSoftwareHP Teemtalk LTU and Media

401

402

403

404

405

406

407

408

409

410

C-40

Host Command Summary

Enable host protect ESC & :

Enable OIA divide line ESC * :

Enable read unprotected field ESC % :

Host message write ESC = *message ESC =

Host message display ESC # ;

Set character attribute ESC 4 *attrib *operation

Set field attribute ESC 3 *attrib *attrib *operation

Set field attribute response ESC 3 *attrib *attrib

Create 1 viewport 24 rows x 80 columns ESC SP r ! ! SP 8 " P

Create 1 viewport 25 rows x 80 columns ESC SP r ! ! SP 9 " P

Create 1 viewport 28 rows x 80 columns ESC SP r ! ! SP " D

Create 1 viewport 24 rows x 132 columns ESC SP r ! ! SP 8 $ D

Create 1 viewport 25 rows x 132 columns ESC SP r ! ! SP 9 $ D

Create 1 viewport 28 rows x 132 columns ESC SP r ! ! SP $ D

Create 2 viewports in 80 column screen ESC SP r " ! SP *r1 " 0 " SP *r2 " P

Create 2 viewports in 132 column screen ESC SP r " ! SP *r1 $ $ " SP *r2 $ D

Create 3 viewports in 80 column screen ESC SP r # ! SP *r1 " 0 " SP *r2 " 0 # SP *r3 " P

Create 3 viewports in 132 column screen ESC SP r # ! SP *r1 $ $ " SP *r2 $ $ # SP *r3 $ D

The ASCII character values of *r1, *r2 and *r3 are listed below. When creating two viewports,

*r1 + *r2 must be 24 or 25. When creating three viewports, *r1 + *r2 + *r3 must be 24 or 25.

Rows ASCII Rows ASCII Rows ASCII Rows ASCII

1! 8( 14. 204

2" 9) 15/ 215

3 # 10 * 16 0 22 6

4 $ 11 + 17 1 23 7

5 % 12 , 18 2 24 8

6 & 13 - 19 3 25 9

Select active partition command/response (not model 11) ESC ! q *

Select host partition command/response (not model 11) ESC SP q *

* A = Viewport 1, B = Viewport 2, C = Viewport 3

Jump partition command/response (not model 11) ESC " A

Enable partition separator line (not model 11) ESC + :

Disable partition separator line (not model 11) ESC + ;

EDITING

Delete character ESC Q

Delete line ESC O

Erase to end of field/line ESC I

Erase to end of page ESC J

Erase input ESC K

Insert character ESC P *character

Insert line ESC N

GENERAL OPERATION

Bell BEL

Cancel ESC S or CAN

Disable write Null ESC " ;

Enable write Null ESC " :

Line turnaround character (if selected) ETX, CR, EOT or DC3