User's Manual

The setting of this option determines whether characters wrap to the next line when the right
margin is reached. When unchecked, on reaching the right margin, the last character position will
be overwritten by every new character received.
●
Auto new line
Factory default: Unchecked
When checked, this will cause a carriage return command to be appended to every line feed
command received.
●
Auto line feed
Factory default: Unchecked
When checked, this will cause a line feed command to be appended to every carriage return
command received.
●
Display controls
Factory default: Unchecked
The setting of this option determines whether received control codes are actioned or displayed.
When checked, a representation of most control codes will be displayed on the screen.
●
Display error codes
Factory default: Checked
This option determines whether a chequerboard symbol is displayed when the delete code is
received.
●
Save scrolled lines
Factory default: Unchecked
If a scroll region is set, selecting this option will cause data scrolled out of the region to be stored
in a history buffer.
●
Save screen before clearing
Factory default: Unchecked
This applies to all DEC VT emulations except VT340 and VT420. It determines the effect of a clear
screen command received from the host. When unchecked, the contents of the current page will
be cleared. When checked, the contents of the current page will be saved and the display will
scroll to the next page.
●
Vertical coupling
Factory default: Checked
The setting of this VT420 mode option determines what happens when the application moves the
cursor to a line not currently displayed in the window when the number of displayed lines is less
than the page size. When checked, the display will automatically scroll vertically to keep the
cursor in view. When unchecked, the display will remain static and the cursor will move off-screen
to the relevant line stored in memory. You can scroll the display to view the lines stored off-screen
by holding down the Ctrl key and pressing the Up or Down Cursor keys.
●
Horizontal coupling
Setup Options
91