User's Manual

Specify the settings required by the auxiliary port device using the options described below and click
OK.
●
Aux Port
Factory default: AUX1
This specifies the auxiliary port device used for which to apply settings. This drop list will only
show configured Auxiliary ports with at least 1 showing. Clicking on the Apply button will save
the shown parameters to the currently selected Aux port and advance to the next available Aux
port for configuration. A maximum of 16 Aux ports can be configured.
●
Mapped to Com Port
Factory default: COM3
This specifies the port used to communicate with the auxiliary port device.
●
Baud Rate
Factory default: 9600
Specifies the connection speed in the range 110 to 115200 baud.
●
Word Length
Factory default: 8
This option specifies the number of data bits sent for each transmitted character.
●
Parity
Factory default: None
Auxiliary Port Setup
97