User's Manual

4. You can configure the transport, connection and emulation settings by selecting the relevant
Configure options in the Session menu. The options displayed by selecting Configure
emulation are described in the section
Setup Options on page 163.
5. To save the session, display the File menu and select Save session as. In the File Name field,
enter a unique name that will identify this session configuration for future selection, then click
Save. Note that session files have the filename extension .tts.
6. To run the session, display the File menu and select Open Session. Select the name of the .tts
session file then click Open.
IBM 3287-1 Printer Support
TN3287 printing is supported by setting the Model option in the 3270 Printer Settings dialog to
IBM-3287-1. When a new Telnet connection is made, the screen will display a message box
indicating the current printer status.
A Print Abort box will be displayed once printing commences, enabling you to cancel the print job.
Note that this will stop print data being sent but will not disconnect you from the host.
Setup Options
The IBM 3270 Printer emulation is configured using setup options in the 3270 Printer Settings
dialog which can be displayed using one of the following three methods:
Using the Session Wizard:
◦
In Step 1 set Emulation to IBM 3270 Printer then click the Configure button.
Using the TeemTalk Window:
◦
On the Session menu, select Emulation > IBM 3270 Printer then select Configure
Emulation....
◦
On the configuration bar, select IBM 3270 Printer in the Emulation list box then click
Configure Emulation.
The setup options are grouped on three tabs labelled Model, National and Print By Pass.
IBM 3287-1 Printer Support
163