User's Manual

4. You can configure the transport, connection and emulation settings by selecting the relevant
Configure options in the Session menu. The options displayed by selecting Configure
emulation are described in the section
Setup Options on page 112.
5. To save the session, display the File menu and select Save session as. In the File Name field,
enter a unique name that will identify this session configuration for future selection, then click
Save. Note that session files have the filename extension .tts.
6. To run the session, display the File menu and select Open Session. Select the name of the .tts
session file then click Open.
Keyboard Mapping
The functions of the computer keyboard are mapped as closely as possible to the terminal being
emulated. The mapping of key functions can be determined by referring to the Emulation Keys list
box in the Key Macro Settings dialog, which is displayed by selecting Key Macros... on the
Tools menu.
The information in brackets in the right column indicates the default mapping of the key function named
in the left column. In the list, S+ indicates the Shift key, C+ indicates the Control key and A+
indicates the Alt key. For example:
HP_SOFTRESET (C+VK_F7)
indicates that the Soft Reset function is mapped to the key combination Control + F7.
Special key functions usually found on an HP 700-92/96 keyboard can be mapped to any key on your
keyboard using the HP virtual key names listed in the Key Macro Settings dialog.
The illustrations on the following pages show where HP 700-92/96 keyboard functions are mapped to
keys on a 101/102 key keyboard.
Figure 13-1 101/102 Key Keyboard Layout for the HP 700-92/96 Emaulation
100 Chapter 13 HP 700-92/96 Emulation