User's Manual

19 TA6530 Emulation
This chapter describes features of the Tandem 6530 terminal emulation.
Creating a TA6530 Emulation Session
You can create a session either using the TeemTalk Session Wizard or while TeemTalk is running.
Using the TeemTalk Session Wizard
This section describes how to use the TeemTalk Session Wizard to create an TA6530 emulation
session.
1. To run the TeemTalk Session Wizard from the Start menu, select All Programs > HP > HP
TeemTalk Terminal Emulator > Session Wizard.
2. In the Session Name field, enter a unique name that will identify this session configuration for
future selection.
3. Select the Transport method then click the Configure button to specify settings.
4. Select the Connection type then click the Configure button to specify settings.
5. Select TA6530 in the Emulation list box then click the Configure button to specify settings.
(The options are described in the section
Setup Options on page 210.)
6. Click Next to display the Advanced Options dialog.
7. Click Next to display the Finalization dialog.
8. If you want a shortcut icon for this session to be created on the desktop, click the checkbox
Create icon on desktop for session.
9. Click OK to create the session and exit.
10. To run the session, either double-click on the desktop icon if one was created for the session, or
run TeemTalk, display the File menu and select Open Session. Select the name of the
required .tts session file then click Open.
Using the TeemTalk Emulator Window
This section describes the procedure for creating a TA6530 emulation session from the TeemTalk
emulator window.
1. Display the Session menu from the menu bar and select Transport... to set the transport
method.
2. Display the Session menu and select Connection... to set the connection method.
3. Display the Session menu and select Emulation.... Set the emulation to TA6530.
Creating a TA6530 Emulation Session
205