User's Manual

Table 26-1 Command switches that affect the Session configuration (continued)
Functionality Command switch Description
Do Not Display
Query Save
Session
Message
-qss <n> This enables you to specify what happens when you attempt to exit a
session which has been modified but not saved. By default a message
box will be displayed asking if you want to save the new settings
before exiting. Using this command line option without the optional
<n> value will prevent the message from being displayed.
The value <n> is optional and can be one of the following:
1 Save the session.
2 Cancel (default action).
Do Not Display
Dialog When
Host
Connection
Closed
-rce <n> This enables you to specify what happens on host disconnection. By
default a dialog box will be displayed asking if you want to reconnect,
cancel or exit TeemTalk. Using this command line option without the
optional value will prevent the message from being displayed.
The <n> value is optional and can be one of the following:
1 Reconnect.
2 Cancel (default action).
3 Exit.
Replay File to
Emulation Only
-replay <n> This specifies that a file replay is directed to the emulation only
(default), not to the host. The optional <n> parameter specifies the
speed of the replay and is a numeric value in the range 0 to 10,
where 0 (default) is fastest and 10 is slowest.
Replay File to
Host Only
-replayhost <n> This specifies that a file replay is directed to the host only, not to the
emulation. The optional <n> parameter specifies the speed of the
replay and is a numeric value in the range 0 to 10, where 0 (default)
is fastest and 10 is slowest.
Replay File to
Both Host &
Emulation
-replayboth <n> This specifies that a file replay is directed to both the host and the
emulation. The optional <n> parameter specifies the speed of the
replay and is a numeric value in the range 0 to 10, where 0
(default)
is fastest and 10 is slowest.
Enable Debug -debug This enables received host data to be logged in a file for replaying
later using the Capture File and Replay File options on the Tools
menu.
Enable Debug
Two-Way
-debug2way This enables both received host data and data sent back to the host to
be logged in a file for replaying later using the Capture File and
Replay File options on the Tools menu.
Set Bitwise
Debugging
Flags
-debug=NN This sets bitwise debugging flags.
274 Chapter 26 Preferences and Command Line Options