User's Manual

Selecting Odd will cause an eighth bit to be added with a value of 1 if the previous 7 bits add up
to an even number, and 0 if the previous 7 bits add up to an odd number.
Selecting Even will cause an eighth bit to be added with a value of 1 if the previous 7 bits add
up to an odd number, and 0 if the previous 7 bits add up to an even number.
Mark parity will set every eighth bit to 1.
Space parity will set every bit to 0.
●
Word Length
Factory default: 8
Specifies the number of data bits sent for each transmitted character.
●
Stop Bits
Factory default: 1
Specifies the number of stop bits sent for each transmitted character.
●
Flow Control
Factory default: Both
This option specifies the type of flow control used by the line port to communicate readiness to
transmit or receive data from the host.
◦
None No flow control.
◦
Input XON/XOFF on received data.
◦
Output XON/XOFF on transmitted data.
◦
Both XON/XOFF on transmitted andreceived data.
◦
Hardware RTS/CTS hardware flow control.
●
Buffer Size
Factory default: 4096
Specifies the size of the buffer used for temporary storage of input and output data.
●
Block on Full
Factory default: Unchecked
Determines the action to take when the print buffer becomes full. Checking this option will cause
all actions to be blocked until the print buffer is ready to receive new data.
●
Process CR/LF/FF
Factory default: Unchecked
When checked, a Carriage Return or Line Feed command will output a new line, and a Form Feed
command will output a new page.
●
Extended string value for new line
Factory default: \r\n
Emulation Printer Settings
67