Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

Installing, Configuring, and Removing the Client B–7
3. Do one of the following:
❏ On Windows NT 4.0, click Start > Settings > Control Panel, and then double click
the Add/Remove Programs icon in the Control Panel. The Add/Remove Program
Properties window appears.
❏ On Windows 2000, click Start > Settings > Control Panel > Add/Remove
Programs. The Add/Remove Program window appears.
4. Select Command Console in the window.
5. Do one of the following:
❏ On Windows NT 4.0, click Add/Remove.
❏ On Windows 2000, click Change/Remove.
6. Follow the instructions on the screen.
NOTE: This procedure removes only the Command Console Client (SWCC Navigation Window).
You can remove the HSG60 Client by using the Add/Remove program.
Where to Find Additional Information
You can find additional information about SWCC by referring to the online Help and to
Compaq StorageWorks Command Console Version 2.4 User Guide.
About the User Guide
Compaq StorageWorks Command Console Version 2.4 User Guide contains additional
information on how to use SWCC. Some of the topics in the user guide are the following:
■ About AES
■ Adding Devices
■ Adding Virtual Disks
■ Setting Up Pager Notification
■ How to Integrate SWCC with Compaq Insight Manager
■ Troubleshooting Information