Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

Index–4 HSG60 ACS Solution Software Version 8.6 for Compaq Tru64 UNIX Installation and Configuration Guide
geometry 2-27
NODESTROY 2-26
NOSAVE_CONFIGURATION 2-26
SAVE_CONFIGURATION 2-26
installation
controller verification 5-8
host adapter 3-1
invalid network port assignments B-3
there is no disk in the drive message B-4
installation verification
CLI commands 5-8
installing
Agent 4-5
integrating SWCC B-7
invalid network port assignments B-3
iostat
Tru64 UNIX utility 3-9
J
JBOD 2-7
L
LOCATE
find devices 2-29
location
cache module 1-2
controller 1-2
LUN IDs
general description 1-27
LUN presentation 1-17
LUNs
creating a filesystem 3-3
creating partitions using disklabel 3-2
preparing for use by filesystem 3-2
M
maintenance port connection
establishing a local connection 5-2
illustrated 5-2
mapping storagesets 2-27
messages
there is no disk in the drive B-4
mirrored caching
enabling 1-10
illustrated 1-10
mirrorset switches
changing
fabric topology 5-24
mirrorsets
planning considerations 2-13
important points 2-14
switches 2-22
moving storagesets 8-5
mulitple-bus failover
restricting host access by offsets 1-25
multiple-bus failover 1-6
ADD CONNECTIONS command 1-18
ADD UNIT command 1-18
ADD UNITcommand 1-18
CLI configuration procedure
fabric topology 7-4
fabric topology
preferring units 5-20
fabric topology configuration
cabling 5-9
host connections 1-18
restricting host access 1-23
disabling access paths 1-23
SET CONNECTIONS command 1-18
SET UNITcommand 1-18
N
network port assignments B-3
node IDs 1-26
restoring 1-27
NODE_ID
worldwide name 1-26
NODESTROY 2-26
NOSAVE_CONFIGURATION 2-26
O
offset
LUN presentation 1-17
restricting host access
multiple-bus fafilover 1-25
transparent fafilover 1-22