HP Tru64 UNIX and TruCluster Server Version 5.1B-5 Patch Summary and Release Notes (March 2009)
• Fixes a problem in which the display for the hwmgr -show name command is not
aligned properly for the name field.
• Adds IEEE 802.1Q Virtual Local Area Network (VLAN) support for the following:
— DEGPA
— DEGXA
— DE50x, lan_common.h
— DE60x
• Fixes a problem in the alt driver for DEGPA Gigabit Ethernet adapters. This
problem affects all Tru64 UNIX systems containing DEGPA network interfaces.
• Fixes a problem with scu where a mismatch between expected and found data
causes incorrect data to be displayed.
• Provides additional support for Ultrium 2 SCSI tape drive.
• Ensures proper compilation of the DDR database.
• Modifies netstat and ifconfig so that when a MAC address is printed, it is printed
using 2-digit hex octets with leading zeros.
• Fixes a problem in which Smart Array 5300 logical volumes are counted as RAID
controllers.
• Adds dumprmt.msg for remote dump/restore messages. This new message catalog
file is used in both rdump and rrestore programs.
• Corrects a potential system crash when shutting down after using a DAPBA or
DAPCA ATM adapter.
• Fixes a problem with non-U.S. USB keyboards used in non-U.S. locales in which
the keyboards are treated as U.S. keyboards by the operating system.
• Fixes various problems in the bcm driver for DEGXA Gigabit Ethernet which can
cause crashes.
• Fixes the dump command to recognize LSM volumes correctly and to not report
random information when an error has occurred.
• Fixes a condition that may cause a panic if the Xserver is stopped.
• Changes the fwupgrade command to allow the specified firmware update image
to be located on a BOOTP server in a connected network.
• Fixes several problems in the bcm driver for DEGXA Gigabit Ethernet adapters,
including the following:
— A condition that causes the driver to incorrectly report data overruns
— A condition that prevents DEGX2-SA modules from being recognized
• Fixes two problems in the tu driver for DE5xx 10/100 MB Ethernet adapters.
• Adds code to print greater than 61 UNIX domain sockets.
• Changes file read errors from /dev/kmem to ignore and continue in a running
system.
• Fixes a problem in the alt driver that prevents DEGPA from being used with DE50x
or DE60x adapters in a LAG set.
154 Tru64 UNIX Patches