Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

About this Guide xvii
Configuration Flowchart
A three-part flowchart is shown on the following pages. Refer to these charts while
configuring a new storage subsystem:
■ Figure 1 on page xviii shows the start of the configuration process.
■ Figure 2 on page xix shows how to configure storage with the command line
interpreter (CLI), which is the low-level interface to the controller.
■ Figure 3 on page xx shows how to configure storage using StorageWorks Command
Console (SWCC), which is the graphical user interface to the controller.
All references in the flowcharts pertain to pages in this guide, unless otherwise
indicated.