Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

3–8 HSG60 ACS Solution Software Version 8.6 for Compaq Tru64 UNIX Installation and Configuration Guide
V4.0G Output
CAM Equipment Device Table (EDT) Information:
Bus: 2, Target: 1, Lun: 0, Device Type: Direct Access
Bus: 2, Target: 1, Lun: 1, Device Type: Direct Access
Bus: 2, Target: 1, Lun: 2, Device Type: Direct Access
Bus: 2, Target: 1, Lun: 3, Device Type: Direct Access
V5.1x Output
CAM Equipment Device Table (EDT) Information:
Bus/Target/Lun Device Type ANSI Vendor ID Product ID Revision N/W
---------------- -------------- ---- ---------- ------------ -------- ----
2 1 0 Direct SCSI-2 DEC HSG60 V86L W
2 1 1 Direct SCSI-2 DEC HSG60 V86L W
2 1 2 Direct SCSI-2 DEC HSG60 V86L W
2 1 3 Direct SCSI-2 DEC HSG60 V86L W
For detailed information about one of the units, you may use:
# /sbin/scu show device bus 2 target 1 lun 0
The preceding command line gives you the SCSI inquiry of the selected device.
HSG60 units appear like any other SCSI device. All four entries for Bus 2, Target 1 in the
example display are HSG60 units. The last entry would be for unit D103 on host SCSI bus
2.
hwmgr
hwmgr is available on TRU64 UNIX V5.1x systems. hwmgr is a very powerful utility for
managing system hardware. For example you can use the following command to view
devices:
# hwmgr −view devices
and to get attributes use the following command:
# hwmgr −get attribute
See the UNIX online help for more information.