Enterprise Volume Manager (Multi-OS) Host Agent Version 2.0D for HP Tru64 UNIX Installation Guide

Installing the EVM Host Agent
2–10 Enterprise Volume Manager (Multi-OS) Host Agent Version 2.0D for HP Tru64 UNIX
Installation Guide
Completing the Installation
If the EVM host agent was started during installation, HP recommends browsing to
the EVM network and verifying that the EVM host agent has been recognized.
Otherwise, perform the verification after manually starting the host agent.
Completing the host agent installation topics include:
• Manually Starting and Stopping the EVM Host Agent, page 2–10
• Browsing to the EVM Network, page 2–10
• Verifying that the EVM Host Agent Is Recognized, page 2–10
• Modifying System Files During Installation and Removal, page 2–11
Manually Starting and Stopping the EVM Host Agent
Refer to the EVM Network Administration Guide for the procedures to manually start
or stop an EVM host agent (daemon).
Browsing to the EVM Network
To browse to the EVM network, the browsing computer must have an EVM-supported
browser and Java Run Time Environment (RTE) installed.
If only a browser is available, browse to EVM and let the EVM server analyze the
browser and RTE environment. Where possible, the EVM server can help to download
the correct RTE.
Refer to the EVM Network Administration Guide and HP StorageWorks Enterprise
Volume Manager (Multi-OS) Server Version 2.0D Release Notes (AA–RTB6A–TE)
for details.
Verifying that the EVM Host Agent Is Recognized
To verify that an EVM host agent is being recognized by the Management Appliance,
complete the following procedure:
1. Browse to the Management Appliance and OSM.
2. Choose Applications > Volume Management > Enterprise Volume Manager.
The EVM Launch page displays.