HSG80 ACS Solution Software Version 8.7 for Compaq Tru64 UNIX Installation and Configuration Guide

Installing and Configuring HSG Agent
4–7HSG80 ACS Solution Software Version 8.7 for Compaq Tru64 UNIX Installation and
Configuration Guide
4–7
10. Press press the Enter key.
A menu for selecting a client system notification scheme appears:
11. From the menu, enter a notification scheme for the client system: 0, 1, 2, or 3.
The notification scheme defines the network protocol to be used by the Agent
when notifying the selected client system of a change in the state of a subsystem.
The following describes how the Transmission Control Protocol/Internet Protocol
(TCP/IP) and the Simple Network Management Protocol (SNMP) work with
SWCC.
12. Press press the Enter key.
The computer asks you if the entered information is correct.
13. Select option y and then press the Enter key.
A message, asking if you would like to add another Client, appears.
14. To stop adding client systems, select option n and press the Enter key.
1 = Detailed Status
■ Can use the Client to open a Storage Window, but you cannot make
modifications in that window
2 = Configuration and
Status
■ Can use the Client to make changes in a Storage Window to modify
a subsystem configuration
Table 4–4: Client System Notification Options
Options SWCC Function
Transmission control Protocol/Internet
Protocol (TCP/IP)
■ Automatically updates the Storage Window of
subsystem changes provided AES is running
■ Required for Windows NT event logging and
pager notification
■ If you do not select TCP/IP, you will need to
refresh the Storage Window (depending on the
subsystem) to obtain the latest status of a
subsystem.
Simple Network Management
Protocol (SNMP)
■ Requires you to use an SNMP-monitoring
program to view SNMP traps
Table 4–3: Client System Access Options
Options SWCC Function