Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

Installing and Configuring the HS-Series Agent 4–11
Removing the Agent
1. Enter the following and press the Enter key:
# setld -d SWCC510
The procedure to remove the Agent asks the following:
Are you sure you want to delete all Agent data?
Client system notification options
Note: For all of the client system
notification options, local
notification is available through an
entry in the system error log file
and Email (provided that Email
notification in PAGEMAIL.COM has
not been disabled).
0 = No Error Notification
−No error notification is provided over
network.
1 = Notification via a TCP/IP Socket (Transmission Control
Protocol/Internet Protocol)
−Updates the Storage Window of
subsystem changes provided AES is running. Required for
Windows NT event logging and pager notification. If you do not
select TCP/IP, you will need to refresh the Storage Window to
obtain the latest status of a subsystem.
2 = Notification via the SNMP protocol (Simple Network
Management Protocol)–Requires you to use an SNMP-monitoring
program to view SNMP traps.
3 = Notification via both TCP/IP and SNMP–Combination of
options 1 and 2.
Deleting a client system entry When you remove a client system from the Agent’s list, you are
instructing the Agent to stop sending updates to that client
system. In addition, you will be unable to access this agent
system from the Navigation Tree.
Email notification Modify file pagemail.com in directory sys$manager. System is the
default.
When an error is logged, the Agent executes the PAGEMAIL.COM
command. You can modify this file for Agent to log errors in a log
file and/or change the account to which Agent sends messages.
You can also modify for which level of errors you will be notified.
Client does not need to be running to perform these actions.
Monitoring interval in seconds How often the subsystem is monitored.
Password It must be a text string that has 4 to 16 characters. It can be
entered from the client system to gain configuration access.
Accessing the SWCC Agent Configuration menu can change it.
Table 4–6 Information Needed to Configure Agent (Continued)
Term/Procedure Description