Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

Installing, Configuring, and Removing the Client B–5
1. Verify that you have properly installed and configured the HS-Series Agent on the
storage subsystem host.
2. Click Start > Programs > Command Console > StorageWorks Command Console.
Client displays the Navigation Window. The Navigation Window lets you monitor and
manage many storage subsystems over the network.
Figure B–1. Navigation window
3. Click File > Add System. The Add System window appears.
4. Type the host name or its TCP/IP address and click Apply.
5. Click Close.
Figure B–2. Navigation window showing storage host system “Atlanta”