Compaq StorageWorks HSG60 ACS Solution Software V8.6 for Compaq Tru64 UNIX Installation and Configuration Guide

1–12 HSG60 ACS Solution Software Version 8.6 for Compaq Tru64 UNIX Installation and Configuration Guide
Enabling/Disabling the CCL in SCSI-3 Mode
The CCL is enabled all the time. There is no option to enable/disable.
Connections
The term “connection” applies to every path between a Fibre Channel adapter in a host
computer and an active host port on a controller.
NOTE: In ACS V8.6 Solution Software the maximum number of supported hosts is 96.
Naming Connections
Compaq highly recommends that you assign names to connections that have meaning in
the context of your particular configuration. One system that works well is to name each
connection after its host, its adapter, its controller, and its controller host port, as follows:
Examples:
A connection from the first adapter in host RED that goes to port 1 of controller A would
be called RED1A1.
A connection from the third adapter in host GREEN that goes to port 2 of controller B
would be called GREEN3B2.
NOTE: Connection names can have a maximum of 9 characters.
Numbers of Connections
The number of connections resulting from cabling one adapter into a switch or hub
depends on failover mode and how many links the configuration has:
HOST1A1
HOST
NAME
PORT
CONTROLLER
ADAPTER