Software Owner manual

Table 8 VCEM ports (continued)

Description

Protocol

PortManaged SystemCMS

configuration

backup from CLI

LDAP

Authentication

TCP636Y

SYSLOGUDP514Y

RADIUS server if

configured

UDP1812, 1813Y

TACACS server

if configured

TCP49Y

All ports are used for TCP and UDP.

The CMS normally has all managed system ports open, as the CMS is a managed system itself. Firewalls can be configured

to block these ports if the CMS is not to be managed from another system.

Installing VCEM

When you are upgrading to a new and different CMS, or are moving to a 64-bit CMS, you might

need to migrate your data by using the Systems Insight Manager data migration tool. If you are

upgrading to a new version of VCEM on the same CMS, data migration with the Systems Insight

Manager data migration tool is not necessary. For more information, see the HP Insight Management

Installation and Configuration Guide.

To install VCEM, follow the steps provided in the HP Insight Management Installer. To access HP

Insight Management online help, click the ? icon in the upper right-hand corner of the window.

Updating VC firmware

VCEM allows you to update VC firmware simultaneously across multiple VCEM managed VC

Domains using VC Domain Firmware Update.

CAUTION: VC Domains with a status of Fail to communicate with VC domain/Disabled enclosure

or Missing external manager lock/Communication established with disabled enclosure can be

selected because they have a transient status. The VC Domain can restore communication with

VCEM or restore the lock before Enable Firmware Update is allowed. If the Fail to communicate

or Missing external manager lock statuses still occur, enabling the firmware update is still allowed

and fails as a consequence.

CAUTION: Firmware Update mode does not allow changes using the VCM user interface. If

changes to VCM are desired, use VCEM Domain Maintenance mode. When using Firmware

Update mode on a VC Domain, do not use VCM CLIs to remove or suspend external manager

locks.

To update VC Firmware:

22 Installing and configuring VCEM