Software Owner manual

Figure 23 SAN fabrics with direct attach fabric type
To disable this feature delete all direct attach SAN fabrics.
• The SNMP access feature is not supported. To disable this feature delete all the items on the
SNMP access table. See Figure 24 (page 41) for more information.
Figure 24 SNMP access configuration
VC 3.7x, 3.6x and 3.5x features that must be disabled in a VC Domain to be part
of a VC Domain Group with VC firmware 3.3x
All VC 3.5x, 3.6x, and 3.7x features must be disabled for VC Domain Groups with firmware mode
3.3x to add 3.7x back into the 3.3x VC Domain Group.
VC 3.5x feature that must be disabled in a VC Domain to be part of a VC Domain
Group with VC firmware 3.3x
Extra FC or FCoE connections are not supported.
Do not configure server profiles with more FC SAN Connections or FCoE Connections than
redundant connections per Virtual Connect Fibre Channel or Virtual Connect Flex Fabric modules
available in the VC Domain. The extra FC SAN or FCoE connections display additional connections
pointing to bays 1 and 2 (in the FCoE connection list) and bays 3 and 4 (in the FC connection list,
Requirements for adding a VC Domain to a VC Domain Group 41