Software Owner manual

Statistical throughput attributes
VCEM displays statistical-throughput configuration information in the VC Domain Properties and
the VC Domain Group properties windows including:
• Add to Group—When a VC Domain is added to a VC Domain Group, the statistics-throughput
configuration setting from the VC Domain Group is applied to the VC Domain.
• VC Domain Maintenance—If the statistics-throughput setting is changed while the VC Domain
is in maintenance mode, the new setting will be propagated to the other VC Domains in the
VC Domain Group when maintenance is completed.
NOTE: For VC Domains that are in compatibility mode, this attribute will not be returned for VC
firmware versions earlier than 3.7x.
Figure 38 displays statistics-throughput configuration information.
Figure 38 VC Domain statistics-throughput configuration information
Viewing Allocated Bandwidth attributes
You can see the preferred or maximum allocated bandwidth speed and bandwidth type for each
fabric on VC Domain and VC Domain Group properties page. Optimized bandwidth attributes
are only applicable to fabrics that have uplink ports from FlexFabric interconnect modules. The
following list identifies the minimum and maximum allocated bandwidth attribute types:
• Minimum allocated bandwidth types:
AUTO—No set value◦
◦ CUSTOM—Value between 100 Mb and 8 Gb
• Maximum allocated bandwidth types:
UNRESTRICTED—No set speed limit◦
◦ CUSTOM—Value between 100 Mb and 8 Gb
68 Managing VC Domains