HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

16 Version 2.0.0
The HP_ComputerSystem.SendTestIndication() method shall return 2 (Failed) if the request to send the
indication could not be processed due to an internal error. Caller should not retry the request.
The HP_ComputerSystem.SendTestIndication() method shall return 0 (OK) if the request to send the
indication was accepted. Table 3 defines the indications that shall be sent.
Table 5 – Test Indications
Property Name Property Implementation
CIM_Indication
PerceivedSeverity 2 (Informational)
3 (Warning)
6 (Critical)
CIM_AlertIndication
Description “This is an Informational Test Event.”
“This is a Warning Test Event.”
“This is a Critical Test Event.”
AlertType 5 (Device Alert)
EventID “1”
“2”
“3”
ProviderName “HP Test”
RecommendedActions “No action is recommended.”
HP_AlertIndication
Summary “Test Event”
ProbableCause 1 (Other)
ProbableCauseDescription “Test Indication”
8.2 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following sub-
clauses. Each sub-clause includes either a statement “All operations are supported as described by
DSP200 v1.2” or a table listing all the operations that are Unspecified by this profile or where the profile
requires behavior other that described by DSP200.
The default list of operations is as follows:
• GetInstance
• Associators
• AssociatorNames
• References
• ReferenceNames
• EnumerateInstances
• EnumerateInstanceNames