HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

WBEM TC Template
10 DMTF Confidential Version 0.9.1
7 Implementation Requirements
This section details the requirements related to the arrangement of instances and properties of instances
for implementations of this profile.
7.1 HP_ProcessorCollection
There may be one or more instance of HP_ProcessorCollection instantiated. Instances of
HP_ProcessorChip and HP_ProcessorCore (depending on whether physical or logical processors are
used for the collection) shall be associated to HP_ProcessorCollection through the
HP_PhysicalMemberOfProcessorCollection and HP_LogicalMemberOfProcessorCollection association
respectively. Instances of HP_ProcessorCollection shall be associated to the containing computer system
instance (HP_ComputerSystem) through the HP_ProcessorGroupHostedCollection association.
The HP_ProcessorCollection shall support aggregation of logical CPU’s or physical CPU’s in the
collection or both.
7.1.1 HP_ProcecorCollection.GroupOperationalStatus
The Processor Collection’s GroupOperationalStatus shall be computed from the worst case
OperationalStatus[0] element of each of the members of the collection.
7.2 HP_PhysicalMemberOfProcessorCollection (Conditional)
When a physical processor collection is implemented, there shall be one instance of
HP_PhysicalMemberOfProcessorCollection instantiated for each instance of HP_ProcessorChip. This
class associates an instance of HP_ProcessorChip to the respective instance of HP_ProcessorCollection.
7.3 HP_LogicalMemberOfProcessorCollection (Conditional)
When a logical processor collection is implemented, there shall be one instance of
HP_LogicalMemberOfProcessorCollection instantiated for each instance of HP_ProcessorCore. This
class associates an instance of HP_ProcessorCore to the respective instance of
HP_ProcessorCollection.
8 Methods
None.
8.1 Profile Conventions for Operations
Support for operations for each profile class (including associations) is specified in the following sub-
clauses. Each sub-clause includes either a statement “All operations are supported as described by
DSP200 v1.2” or a table listing all the operations that are Unspecified by this profile or where the profile
requires behavior other that described by DSP200.
The default list of operations is as follows:
• GetInstance
• Associators
• AssociatorNames
• References
• ReferenceNames
• EnumerateInstances