HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

HP Memory Physical Asset Profile
Version 1.0 HP Confidential 21
Mmcol1: HP_MemoryCollection
GroupOperationalStatus[0]: Failed
HP_HostedMemoryCollection
system1: HP_ComputerSystem
OperationalStatus[0]: Failed
HP_MemberOfMemoryCollection
Mm2: HP_MemoryModule
OperationalStatus[0]: OK
Mb1 : HP_MemoryBoard
OperationalStatus[0]: Failed
Mbs1: HP_MemoryBoardSlot
HP_MemoryBoardInSlot
Csc1: HP_ComputerSystemChassis
HP_SystemMemoryBoard
HP_SystemMemoryModule
HP_MemoryModuleOnBoard
HP_MemoryModuleInSlot
Ms1: HP_MemoryModuleSlot
Ms2: HP_MemoryModuleSlot
HP_MemoryModuleInSlot
HP_SystemMemoryBoardSlot
HP_MemoryModuleSlotOnBoard
Mm1: HP_MemoryModule
OperationalStatus[0]: OK
Figure 4 – Memory Physical Asset Profile (Memory board instances)
Figure 5 below represents a possible instantiation of the Memory Physical Asset Profile propagating the
status of the physical memory modules and a memory board with redundancy.
Because the memory board instances that are associated to the memory collection are also associated to
the memory board redundancy set, the memory collection “Mmcol1” derives its GroupOperationalStatus
from the redundancy set “Mbred1” RedundancyStatus condition.
Memory module instance “Mm1” and “Mm2” reside in memory board “Mb1” via the
HP_MemoryModuleOnBoard association. These modules are in memory slots “Ms1” and “Ms2” which
are on memory board “Mb1” via HP_MemoryModuleSlotOnBoard.
Memory board instance “Mb1” belongs to redundancy set “Mbred1” via
HP_MemberOfMemoryRedundancySet associations. This memory board resides in slot “Mbs1” via
HP_MemoryBoardInSlot.