HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

12 Version 2.1.1
7 Implementation Requirements
7.1 HP_ManagementProcessor
There shall be at least one instance of HP_ManagementProcessor instantiated for the active or enabled
MP controller. If a system contains additional controllers which are disabled or inactive, instance(s) may
be instantiated with the appropriate state indicated.
7.1.1 HP_ManagementProcessor.ControllerType
HP_ManagementProcessor.ControllerType is a property which describes the identity or type of MP
controller in the system using an appropriate enumeration value.
The property is conditional based on the enabled state of the MP (see section 7.1.7). If the MP is
disabled, the property will not be populated; if the MP is enabled, the property is Mandatory.
7.1.2 HP_ManagementProcessor.UniqueIdentifier
HP_ManagementProcessor.UniqueIdentifier is a property which contains an identifier to uniquely
distinguish an MP controller from any other MP hardware. This may be the serial number, MAC address,
UUID or other identifier which uniquely identifies an individual MP. This value is opaque and not intended
to be parsed; it is intended to be used as a correlatable identifier to match an instance of a MP in the host
OS CIMOM namespace with the data provided at the MP network interface.
The property is conditional based on the enabled state of the MP (see section 7.1.7). If the MP is
disabled, the property will not be populated; if the MP is enabled, the property is Mandatory.
7.1.3 HP_ManagementProcessor.IPAddress
HP_ManagementProcessor.IPAddress is a property which contains the IP address of the MP network
interface controller where MP configuration can be obtained.
The property is conditional based on the enabled state of the MP (see section 7.1.7). If the MP is
disabled, the property will not be populated; if the MP is enabled, the property is Mandatory.
7.1.4 HP_ManagementProcessor.URL
HP_ManagementProcessor.URL is a property which contains the Uniform Resource Locator (URL) of the
MP provided web interface.
The property is conditional based on the enabled state of the MP (see section 7.1.7). If the MP is
disabled, the property will not be populated; if the MP is enabled, the property is Mandatory.
7.1.5 HP_ManagementProcessor.SupportedProtocols
HP_ManagementProcessor.SupportedProtocols is a property which contains a list of the protocols which
are supported and enabled/active on the MP. Each protocol is represented using an appropriate
enumeration value.
The property is conditional based on the enabled state of the MP (see section 7.1.7). If the MP is
disabled, the property will not be populated; if the MP is enabled, the property is Mandatory.
7.1.6 HP_ManagementProcessor.NICCondition
HP_ManagementProcessor.NICCondition is a property which indicates the operating state of the MP
network interface controller using an appropriate enumeration value.