HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

42 Version 2.0.0
7.4.1 HPSA_StorageVolume.Deleteable
Boolean value indicates whether this logical volume can be deleted. In most configurations, only the
volume that is physically located at the end of the raid set can be deleted.
7.4.2 HPSA_StorageVolume.Accelerator
Value that indicates the status of the accelerator for this logical volume.
Supported values are as follows
Table 25 - HP Smart Array profile: HPSA_StorageVolume.Accelerator
Value ValueMap
0
Unknown
1
Enabled
2
Disabled
7.4.3 HPSA_StorageVolume.StripeSize
Value indicates the current stripe size in Bytes for the Logical Volume. Note that this may not have a
value for some configurations (e.g. RAID 0 with a single drive, RAID 1 with only two drives).
7.4.4 HPSA_StorageVolume.PercentComplete
During a rebuild or expand operation, this will indicate progress as a percentage value. Note this value
shall only be populated when a rebuild or expand operation is being performed on this logical volume.
7.4.5 HPSA_StorageVolume.FaultTolerance
Enumeration to indicate which type of raid is currently configured for a logical volume. Supported values
are:
Table 26 - HP Smart Array profile: HPSA_StorageVolume.FaultTolerance
Value
ValueMap
0
Unknown
1
RAID 0
2
RAID 1
3
RAID 1+0
4
RAID 4
5
RAID 5
6
RAID 51
7
RAID 6
8
RAID 50
9
RAID 60
7.4.6 HPSA_StorageVolume.OperationalStatus
OperationalStatus values have been extended to add Smart Array specific values for Logical Volume
status.
The extended values shall be populated in OperationalStatus[1] and the equivalent DMTF defined status
will be populated in OperationalStatus[0] as specified in Table . Note these extended values will more
accurately define the storage volume’s status when in a degraded state.
Table 27 - HP Smart Array profile: HPSA_StorageVolume.OperationalStatus – Extended values