HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

44 Version 2.0.0

Value ValueMap Description

configured non-redundant

Volume is configured with

redundant paths but is

currently not redundant

possibly due to failure of 1

or more paths or a

configuration error

7.4.8 HPSA_StorageVolume.OSName

This should display the volume name as it is known to the operating system if known otherwise it shall

either show “Unknown” or not be assigned a value.

7.4.9 HPSA_StorageVolume.Identify(uint32 Duration)

This method will cause hard drives that make up this logical volume to set some indicator (e.g. set or blink

drive LEDs) for the given duration (default duration is 30 seconds). After the duration has expired the

drive indicator(s) will return to normal use

Return values for Identify() method shall be the same as specified in Table 12 where the method

execution behavior matches the return code description.

Identify() parameters shall be the same as those specified in Table 13.

7.5 HPSA_StoragePool

The HPSA_StoragePool class has been extended from CIM_StoragePool class as defined in SNIA Block

Services profile.

7.5.1 HPSA_StoragePool.Identify(uint32 Duration)

This method will cause hard drives that make up this Storage Pool to set some indicator (e.g. set or blink

drive LEDs) for the given duration (default duration is 30 seconds). After the duration has expired the

drive indicator(s) will return to normal use

Return values for Identify() method shall be the same as specified in Table 12 where the method

execution behavior matches the return code description.

Identify() parameters shall be the same as those specified in Table 13.

7.6 HPSA_MediaAccessStatData

The SNIA Disk Drive Lite profile has been extended to add the class HPSA_MediaAccessStatData. The

following properties have been added to model the Monitoring and Performance counter for Hard Drives

connected to Smart Array controllers.

7.6.1 HPSA_MediaAccessStatData.AbortedCommands

Value indicates the number of Aborted Commands as reported by MNP counters.

7.6.2 HPSA_MediaAccessStatData.BadTargetErrors

Value indicates the number of Bad Target Errors as reported by MNP counters.