HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 2.0.0 49
7.12.2 HPSA_ EncProtocolEndpoint.OtherTypeDescription
The type of protocol endpoint when the Type property of this class (or any of its subclasses) is set to 1
(Other).Value is set to the string ‘SCSI’.
7.12.3 HPSA_ EncProtocolEndpoint.Role
Value is set to 3 for Target port.
7.12.4 HPSA_ EncProtocolEndpoint.Path
Value indicates whether the enclosure port path is active or not.
Table 21 - HP Smart Array profile: HPSA_ EncProtocolEndpoint.Path
Value ValueMap
0
Unknown
2
Active
3
Passive
5
Path Error
7.13 HPSA_EncSASPort
The HPSA_EncSASPort class has been extended from CIM_LogicalPort to define an enclosure target
port.
7.13.1 HPSA_EncSASPort. OperationalStatus
This value indicates the Operational Status of the port. Value is set to 2 (OK) .
7.13.2 HPSA_EncSASPort.PortType
PortType defines the type of port. Value is set to 94 for SAS port.
7.13.3 HPSA_EncSASPort.UsageRestriction
A LogicalPort might be identifiable as a front end or back end port. If there is no restriction on the use of
the port, then the value should be set to 'not restricted'. Value is set to 4 (Not restricted) for Target port.
7.14 HPSA_ConnectivityCollection
HPSA_ConnectivityCollection class derives from CIM_ConnectivityCollection to group initiator and target
ports. HPSA_ISASSCSIProtocolEndpoint instance of the Initiator port profile and
HPSA_EncProtocolEndpoint are grouped in one collection using HPSA_ConnectivityCollection instance
to represent the connection between array controller initiator ports to the Enclosure port.
7.14.1 HPSA_ ConnectivityCollection. ConnectivityStatus
An enumeration describing the current or potential connectivity between endpoints in this collection.
Table 22 - HP Smart Array profile: HPSA_ ConnectivityCollection.ConnectivityStatus
Value ValueMap
0
Unknown
2
Connectivity/Up
3
No Connectivity/Down