HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

20 Version 2.1.0
7.1.2 HPSAS_DiskDrive.DriveConfiguration
Indicates the how the drive has been configured by the controller. Supported values are:
Table 4 - HP SAS HBA profile: HPSAS_DiskDrive.DriveConfiguration
Value ValueMap
0
Unknown
1
Unconfigured
2
Data
3
Spare
4
Non RAID
7.1.3 HPSAS_DiskDrive.DriveRotationalSpeed
Value indicates the rotational speed of the drive in Revolutions per minute.
7.1.4 HPSAS_DiskDrive.DriveHasMNPData
Boolean value indicates that the drive supports reporting of Monitoring and Performance data counters.
Note that this value will always be false for SAS HBA provider.
7.1.5 HPSAS_DiskDrive.DrivePlacement
Value indicates where the drive is located with respect to the controller.
Table 5 - HP SAS HBA profile: HPSAS_DrivePlacement
Value ValueMap
0
Unknown
1
Internal
2
External
7.1.6 HPSAS_DiskDrive.OperationalStatus.
HPSAS_DiskDrive.OperationalStatus[0] property shall be implemented. This property indicates the
Operational Status of the disk drive. Operationalstatus[0] depicts the Primary operational status of the
disk drive .
OperationalStatus[1] values shows the secondary(or extended) operational status of the disk drive.
The below values shows the possible OperationalStatus[1] values related to secure erase operations.
Table 6 HP SAS HBA profile: HPSAS_DiskDrive.OperationalStatus
Value ValueMap
0x8000
Queued for Secure Erase
0x8001
Erase in Progress
0x8002
Erase Completed
The below values shows the possible OperationalStatus[1] values to account for the failure of a path from
controller to disk.
• If any path to the disk making up this volume is currently set to 5 (Path Error) and there still exists
at least one path that is active and the disk is currently ok then
:
o OperationalStatus [0]: 3 (degraded)
o OperationalStatus[1]: 32771 (0x8003) (
Physical Path In Error)