HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

22 Version 2.1.0
7.1.10 HPSAS_DiskDrive. SSDWearStatus
This value indicates the wearout status of the Solid State drive.
Table 21 - HP SAS HBA profile: HPSAS_DiskDrive.DrivePlacement
Value
ValueMap
0
Unknown
1
OK
2
56 day threshold passed
3
5 percent threshold passed
4
2 percent threshold passed
5
SSD Wear Out
7.1.11 HPSAS_DiskDrive.SmartCarrierAuthStatus
This value indicates the status of the Smart Carrier Authentication if the controller supports hard drive and
SmartCarrier Authentication.
Table 22 - HP Smart Array profile: HPSAS_DiskDrive.SmartCarrierAuthStatus
Value
ValueMap
0
Not Supported
1
Not Authenticated
2
Authenticated
3
Other
7.1.12 HPSAS_DiskDrive.OtherSmartCarrierAuthStatus
A string that describes the authentication status of the element when the
HPSAS_DiskDrive.SmartCarrierAuthStatus property is set to 3 ("Other"). This property must be set to null
when HPSAS_DiskDrive.SmartCarrierAuthStatus is any value other than 3.
7.1.13 HPSAS_DiskDrive.SSDPercentEnduranceUsed
This value reports the Physical Drive Solid State Percent Endurance Used as Real. This property will only
be available if the controller firmware supports reporting of solid state drive life information.
7.2 HPSAS_StorageVolume
The HPSAS_StorageVolume class has been extended from CIM_StorageVolume class as defined in
SNIA Block Services profile.
7.2.1 HPSAS_StorageVolume.PercentComplete
During a rebuild operation, this will indicate progress as a percentage value. Note this value shall only be
populated when a rebuild operation is being performed on this logical volume.
7.2.2 HPSAS_StorageVolume.FaultTolerance
Enumeration to indicate which type of raid is currently configured for a logical volume. Supported values
are: