HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

18 Version 1.2.0
system1:
HP_ComputerSystem
HP_ComputerSystemPackage
chassis1 :
HP_ComputerSystemChassis
fan3:HP_Fan
CIM_SystemDevice
loc1:HP_Location
ElementLocationTagDesc:Fan
ElementLocationTag:”3"
LocationInformation[0] – “1"
LocationInfoDesc[0] – Slot
LocationInformation[1] – “3”
LocationInfoDesc[1] – Chassis
LocationInformation[2] – “2"
LocationInfoDesc[2] – Slot
LocationInformation[3] – “2”
LocationInfoDesc[3] – Chassis
HP_ElementLocation
Figure 3 – Location without physical side of model
A typical implementation of a set of providers that either does not or only partially builds out the physical
model is shown in Figure 4. The system contains 2 memory modules, 1 fan, and 1 PCI controller. From
the instances of HP_Location, the client can create the following location strings from the information
provided by the model instance (note: for illustrative purpose only):
• Fan 1 has a Hood Tag ID of “Fan 1”
• Memory Module 1 is contained in Socket 1
• Memory Module 2 is contained in Socket 2
• Port1 has PCI Bus:Device:Function of 1:3:1 is contained in Slot 5