HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.0 U1 June 2012 Profiles

Version 1.2.0 19
system1:
HP_ComputerSystem
HP_ComputerSystemPackage
chassis1 :
HP_ComputerSystemChassis
fan3:HP_Fan
loc1:HP_Location
ElementLocationTagDesc:Hood Tag
ElementLocationTag:”Fan 1"
LocationInformation[0] – (not used)
LocationInfoDesc[0] – (not used)
mem1:HP_Memory
HP_ElementLocation
mm1:HP_MemoryModule
mm2:HP_MemoryModule
loc1:HP_Location
ElementLocationTagDesc:Memory Module
ElementLocationTag:”1"
LocationInformation[0] – “1”
LocationInfoDesc[0] – Socket
loc2:HP_Location
ElementLocationTagDesc:Memory Module
ElementLocationTag:”2"
LocationInformation[0] – “2”
LocationInfoDesc[0] – Socket
HP_RealizesMemoryModule
HP_ElementLocation
HP_ElementLocation
dev1:CIM_PCIDevice
loc3:HP_Location
ElementLocationTagDesc:PCI Bus:Device:Function
ElementLocationTag:”1:3:1"
LocationInformation[0] – “5”
LocationInfoDesc[0] – Slot
HP_ElementLocation
port1:CIM_LogicalPort
CIM_SystemDevice
CIM_PortOnDevice
Figure 4 – Typical Location Implementation
10 CIM Elements
The implementation requirements for the classes and properties described in this section are defined in
the “Implementation Requirements” section (see Section 7).
Table 4 – CIM Elements – HP Profile Registration Profile
Element Name Requirement Description
Classes
HP_Location Mandatory (see section 7.1 and 10.1)
HP_ElementLocation Mandatory (see section 10.2)
Indications
None defined.
10.1 HP_Location
The HP_Location is used to model a location for a managed element. Table 4 shows the properties that
shall be implemented for the HP_Location class.