HP Insight Management WBEM Providers for HP integrated VMware ESXi 5.1 U2 June 2014 Datasheets

Property Name
Property Implementation
TypeOfSet
Represents the type of redundancy currently in operation for the Advanced
Memory Protection system. This property corresponds functionally to the
property
CurrentConfiguration.
TypeOfSet[0] contains the current type of redundancy:
1 (Other), when the system is operating in Advanced ECC or Lockstep mode
2 (N+1), when the system is operating in RAID (XOR) mode
3 (Load Balanced), when the system is operating in Mirrored mode
4 (Sparing), when the system is operating in Online Spare mode
OtherTypeOfSet
OtherTypeOfSet[0] contains the type of redundancy when the property
TypeOfSet[0] = 1 (Other). In this case, the property will contain the value
Advanced ECC or Lockstep, otherwise the property is not populated.
LoadBalanceAlgorithm
2 (No Load Balancing)
RedundancyStatus
Represents the current memory redundancy status as follows:
2 (Fully Redundant)
System is operating properly in the Advanced Memory Protection mode
given in the
TargetConfiguration property.
3 (Degraded Redundancy)
Degraded Redundancy can occur in either of the following conditions:
• System is not operating in the TargetConfiguration mode (the
CurrentConfiguration mode does not match the
TargetConfiguration mode).
• System is operating in the TargetConfiguration mode but
memory module(s) have correctable errors exceeding the condition for
pre-failure warranty.
HP_MemoryRedundancySet
OperatingSpeed
The current operating speed of the Advanced Memory Protection
subsystem in MHz
HP Insight Management WBEM System Memory Provider 25