HP Insight Management WBEM Providers for HP integrated VMware ESXi Data Sheet

HP Insight Manager WBEM System Fan Provider Overview 443
The following table lists the properties implemented.
Property Name Property Implementation
CIM_ManagedElement
Caption
Cooling Collection
Description
This is a collection of all devices including fans that provide cooling.
GroupStatusDescription
Where: GroupStatusDescription represents the value of the
GroupStatusDescriptions[0] property.
ElementName Cooling Collection
CIM_SystemSpecificCollection
InstanceID
Unique identifier for this cooling collection instance.
HP_GroupSystemSpecificCollection
GroupOperationalStatus[
0]
Represents the most severe cooling redundancy status and non-fault
tolerant fan operational status:
0 (Unknown) – if fan collection status is unknown;
2 (OK) – if fans are operating properly;
3 (Degraded) – if no SMX_Fan.OperationalStatus[0] for all non-
fault tolerant fans report 6 (Error) and
SMX_FanRedundancySet.RedundancyStatus for any cooling
redundancy sets report 3 (Degraded Redundancy) or 4 (Redundancy
Lost) and no cooling redundancy sets report 5 (Overall Failure).
6 (Error) – if SMX_Fan.OperationalStatus[0] for any non-fault
tolerant fans report 6 (Error) or
SMX_FanRedundancySet.RedundancyStatus for any cooling
redundancy sets report 5 (Overall Failure).
Note:
If the system starts up with a redundancy status set to 4 (Redundancy Lost) and
no fans have been removed or failed, the GroupOperationalStatus will
be set to 2 (OK) because this is a valid configuration.
GroupStatusDescriptions
[0]
Unknown status for fans if GroupOperationalStatus[0] is 0
(Unknown);
Fans are operating properly if GroupOperationalStatus[0] is
2 (OK);
Fault tolerant fans are degraded if
GroupOperationalStatus[0] is 3 (Degraded);
Fans have failed if GroupOperationalStatus[0] is 6 (Error)
SMX_FanRedundancySet Class
The SMX_FanRedundancySet class is used to model fan redundancy sets on servers.
The following table lists the properties implemented.