HP Insight Management WBEM Providers for HP integrated VMware vSphere 5.1 February 2013 Datasheets

Property Name
Property Implementation
HP_GroupSystemSpecificCollection
GroupOperationalStatus[
0]
Represents the most severe cooling redundancy status and non-fault
tolerant fan operational status:
0 (Unknown) – if fan collection status is unknown;
2 (OK) – if fans are operating properly;
3 (Degraded) – if no SMX_Fan.OperationalStatus[0] for all non-fault
tolerant fans report
6 (Error) and
SMX_FanRedundancySet.RedundancyStatus for any cooling
redundancy sets report 3 (Degraded Redundancy) or
4 (Redundancy Lost)
and no cooling redundancy sets report 5 (Overall Failure).
6 (Error) – if SMX_Fan.OperationalStatus[0] for any non-fault
tolerant fans report
6 (Error) or
SMX_FanRedundancySet.RedundancyStatus for any cooling
redundancy sets report
5 (Overall Failure).
Note:
If the system starts up with a redundancy status set to 4
(Redundancy Lost) and
no fans have been removed or failed, the GroupOperationalStatus will
be set to 2 (OK) because this is a valid configuration.
GroupStatusDescriptions
[0]
Unknown status for fans if GroupOperationalStatus[0] is 0
(Unknown);
Fans are operating properly if GroupOperationalStatus[0] is
2 (OK);
Fault tolerant fans are degraded if
GroupOperationalStatus[0] is 3 (Degraded);
Fans have failed if GroupOperationalStatus[0] is 6 (Error)
1-2-3 SMX_FanRedundancySet Class
The SMX_FanRedundancySet class is used to model fan redundancy sets on servers.
The following table lists the properties implemented.
Property Name
Property Implementation