HP Remote System Management Utility User Guide for ESXi Server 5.0 - October 2011
Table 2 Filter values description (continued)
DescriptionFilter Value
Usage of this value filters the SAS adapters, physical drives, and logical
volumes property from the reported data.
SAS
Usage of this value filters the Smart Array adapters, physical drives, and
logical volumes property from the reported data.
SA
Usage of this value filters the System Firmware property from the reported data.SF
Usage of this value filters the System Identification property from the reported data.SI
Usage of this value filters the Temperature property from the reported data.TEMP
Table 3 (page 6) provides information about the CIM classes that implement the supported filter
values.
Table 3 Mapping Filter values to the CIM classes
CIM ClassesFilter value
Following CIM classes implement the CPU filter value:CPU
• SMX_CacheMemory
• SMX_Processor
• SMX_ProcessorCapabilities
• SMX_ProcessorChip
Following CIM classes implement the FAN filter value:FAN
• SMX_Fan
• SMX_FanSpeedSensor
Following CIM classes implement the FC filter value:FC
• SMX_FCHBAPhysicalPackage
• SMX_FCHBAFCPortStatistics
• SMX_FCHBAFirmwareIdentityBIOS
• SMX_FCHBAFCPort
• SMX_FCHBAFirmwareIdentityFW
Following CIM classes implement the ILO filter value:ILO
• SMX_ManagementProcessor
• SMX_MPFirmware
Following CIM classes implement the IML filter value:IML
• SMX_IMLRecordLog
• SMX_IMLLogEntry
Following CIM classes implement the MEMORY filter value:MEMORY
• SMX_Memory
• SMX_MemoryBoard
• SMX_MemoryModule
• SMX_MemoryRedundancySet
Following CIM classes implement the NIC filter value:NIC
• SMX_EthernetPortController
• SMX_EthernetControllerLocation
• SMX_EthernetLANEndpoint
6 Introduction