HP VMware Utilities User Guide VMware vSphere 5.1 for February 2013

<REMOTE_CONSOLE_PORT_STATUS VALUE="3"/>

<REMOTE_CONSOLE_ENCRYPTION VALUE="N"/>

<PREFER_TERMINAL_SERVICES VALUE="N"/>

<HTTPS_PORT VALUE="443"/>

<HTTP_PORT VALUE="80"/>

<REMOTE_CONSOLE_PORT VALUE="23"/>

<TERMINAL_SERVICES_PORT VALUE="3389"/>

<VIRTUAL_MEDIA_PORT VALUE="17988"/>

<MIN_PASSWORD VALUE="4"/>

</GET_GLOBAL_SETTINGS>

Setting a configuration

A specific configuration can be sent to the iLO 2, iLO 3 or iLO 4 by using the command format:

/opt/hp/tools # ./hponcfg -f add_user.xml -l log.txt

In this example, the input file has contents:

<!–Add user with minimal privileges to test default setting of assigned privileges to 'N'—>

<USER_INFO MODE="write">

<ADD_USER USER_NAME="Landy9" USER_LOGIN="mandy9"

PASSWORD="floppyshoes">

<RESET_SERVER_PRIV value="Y" />

<ADMIN_PRIV value="Y" />

</ADD_USER>

</USER_INFO>

</LOGIN>

</RIBCL>

The specified user will be added to the device.

HPONCFG command-line examples

This section provides sample examples to run the utility.

Table 3 hponcfg command-line examples

DescriptionCommand-line argument

This argument displays help information.hponcfg -h

This argument returns the host server name and serial number.hponcfg -g

To view the command usage options, run the following command:

/opt/hp/tools # ./hponcfg —h

All options supported by the command are listed in the output.

To get the host server name and serial number, run the following command:

/opt/hp/tools # ./hponcfg —g

The following output is displayed:

Firmware Revision = 2.05 Device type = iLO 2 Driver name = hpilo

Host Information:

Server Name: localhost.americas.hpqcorp.net

Server Number: 000000000

To set the minimum firmware level, run the following command:

/opt/hp/tools # ./hponcfg —m 2

The following output is displayed:

Firmware Revision = 2.05 Device type = iLO 2 Driver name = hpilo

8 Introduction