P00105_-_HP_Base_Server_Profile
Table Of Contents
- Foreword
- Introduction
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Symbols and Abbreviated Terms
- 5 Synopsis
- 6 Description
- 7 Implementation Requirements
- 7.1 HP_ComputerSystem
- 7.1.1 Support of System Contact Information (optional)
- 7.1.2 HP_ComputerSystem.LocationIndicator (optional)
- 7.1.3 HP_ComputerSystem.OtherIdentifyingInfo and IdentifyingDescriptions (optional)
- 7.1.4 HP_ComputerSystem.OperationalStatus (mandatory)
- 7.1.5 HP_ComputerSystem.OperationalStatusClassNames[] (conditional)
- 7.1.6 HP_ComputerSystem.Dedicated OtherDedicatedDescription (Mandatory)
- 7.1.7 HP_ComputerSystem physical identifiers (Optional)
- 7.1 HP_ComputerSystem
- 8 Methods
- 9 Use Cases
- 10 CIM Elements
- 11 Durable Names and Correlatable IDs
- Bibliography
10 Version 1.5.1
Support for these properties is optional. If supported, these properties must be supported as writeable.
In addition, the values written to these properties must be persisted across reboots. Clients determine
that this property is supported by querying a non-null, non-empty string contained in the property. If
implemented, providers must initialize the property to the string value “not set” if a client has not yet
initialized or set a value for the property for the first time.
• HP_ComputerSystem.PrimaryOwnerContact
• HP_ComputerSystem.PrimaryOwnerName
• HP_ComputerSystem.PrimaryOwnerPager
• HP_ComptuerSystem.SecondaryOwnerContact
• HP_ComputerSystem.SecondaryOwnerName
• HP_ComputerSystem.SecondaryOwnerPager
7.1.2 HP_ComputerSystem.LocationIndicator (optional)
Implementations that conform to this profile may populate LocationIndicator as follows:
LocationIndicator will have a read only value 4 (Not Supported) if a server has no location indicator (e.g.,
LED). This property will have a read only value 0 (Unknown) if the location indicator status is unknown. If
implemented for any other values, this property must reflect the current state of the location indicator on
the server. In addition, this property may be implemented as writeable for these other values. Writing
values reflecting a state change not supported by the server’s location indicator shall fail by retaining the
previous value.
7.1.3 HP_ComputerSystem.OtherIdentifyingInfo and IdentifyingDescriptions
(optional)
Implementations that conform to this profile may populate OtherIdentifyingInfo and IdentifyingDescriptions
with information about the ProductID for the physical system. If implemented, IdentifyingDescription shall
contain the value HPQ:ProductID in any array location. The corresponding OtherIdentifyingInfo array
location shall contain the ProductID for the system. This value shall be the same value that is or could be
populated in the HP_ComputerSystemChassis.ProductID property. That is, the same semantics apply for
both values.
Implementations that conform to this profile may populate OtherIdentifyingInfo and IdentifyingDescriptions
with information about the Serial Number for the chassis containing the physical system. If implemented,
IdentifyingDescription shall contain the value HPQ:ChassisSerialNumber in any array location. The
corresponding OtherIdentifyingInfo array location shall contain the Serial Number for the chassis
containing the system. This value shall be the same value that is or could be populated in the
CIM_ComputerSystemChassis.SerialNumber property for the chassis that contains the physical package
for the system. That is, the same semantics apply for both values.