P00121_-_HP_Smart_Array_Profile

28 Version 1.3.001
HPSA_ArraySystem
HPSA_DiskDrive
HPSA_StorageExtent
MediaPresent
HPSA_DiskDriveStorageExtent
DiskDrive Lite
CIM_SystemDevice
HPSA_ArraySystemDiskDrive
CIM_SystemDevice
HPSA_ArraySystemStorageExtent
HPSA_TSASSCSIProtocolEndpoint
HPSA_TSASPort
CIM_SystemDevice
HPSA_ArraySystemTSASPort
CIM_HostedAccessPoint
HPSA_ArraySystemTSASSCSIPE
Target Port /
SAS Target Port
CIM_SAPAvailableForElement
HPSA_DiskDriveTSASSCSIPE
HPSA_TSASSCSIProtocolEndpoint
HPSA_TSASPort
CIM_DeviceSAPImplementation
HPSA_TSASPortTSASSCSIPE
Figure 13 – HP Smart Array profile: Target Port Class Diagram
6.13 SAS Initiator Port support
The Initiator port subprofile is used to model the SMI-S 1.4 SAS Initiator Port profile. This support is
implemented only for multi-path supported controllers.
In this implementation, for all ports on the smart array controller that are supported an instance of both
HPSA_ISASPort and HPSA_ISASSCSIProtocolEndpoint is created.
Each instance of HPSA_ISASPort is associated to HPSA_ArraySystem (via
HPSA_ArraySystemISASPort) that represents the array controller system that the port is contained on. It
is also associated to the instance of HPSA_PortController (via HPSA_PortControllerISASPort) that
represents the port controller of the array system.
Each instance of HPSA_ISASSCSIProtocolEndpoint is associated to the instance of HPSA_ISASPort (via
HPSA_ISAPortSASISASSCSIPE) that implements it. Each instance is also associated to the instance of
HPSA_ArraySystem (via HPSA_ArraySystemISASSCSIPE) that contains the port that implements the
protocol endpoint.